Bucket trucks are one of the best ways to provide a safe, elevated platform for workers, allowing them to use both arms to perform their work.

These trucks use an aerial device attached to the truck that raises workers in the air to perform job tasks. Some examples of aerial devices include:

  • Articulating boom platforms
  • Extensible boom platforms
  • An aerial ladder

While bucket trucks are safer than other alternatives, they still have hazards that are associated with them. Employees using bucket trucks should be aware of those hazards and follow all the safety rules required to work with them.

Bucket Truck Hazards

Using a bucket truck may seem simple, but they present unique hazards that employees who are operating them should be aware of. There are also requirements employers must follow when using one.

Employees can be severely injured if they do not pay attention to their surroundings when setting up the bucket truck. If they truck is set up on uneven ground, the bucket can tip over when it’s being raised, throwing the employees inside the bucket out. Employees in the bucket may be crushed by an object if the lift is raised in an area with obstructions. If employees are raised near or into powerlines, they can be electrocuted. Employees also risk falling out of the bucket if they are not secured properly to the boom or bucket.

Before Work Begins

Before using the bucket truck, the driver of the vehicle or operator of the bucket truck must be trained on how to operate the lift. They must also perform a safety check. This inspection is necessary to determine if there are any operational issues with the bucket truck prior to an employee using it and to identify damage to the vehicle, leaks or hazards. This daily safety checks should include inspections that cover:

  • Boom and bucket condition
  • Cylinders and hoses
  • Outriggers and pedestal mounting bolts
  • Tire condition and inflation
  • Vehicle body integrity
  • Fluids
  • Lift controls
  • Emergency and safety systems
  • Lights

Each component of the bucket truck should be checked and recorded to show the bucket truck was in safe working condition prior to use. Once this is completed, the bucket truck is ready for use.

Prior to Lifting the Bucket

The vehicle should be positioned properly before any work begins. This means that if the bucket is in the air, the vehicle moves, the tower must be secured in the lower traveling position.

When positioning the bucket truck, make sure:

  • The vehicle is on even ground
  • The emergency brake is set and outriggers are placed
  • The wheels are chocked
  • There are no overhead obstructions in view

Employees should not be lifted into the air in a bucket if there is bad weather. The risk of injury substantially increases during bad weather, especially with lightning and high winds.

Fall Protection

Employees must wear personal fall arrest protection or a body belt in the tethering system or in a restraint system while working in the bucket. The fall protection should be attached to an anchor point in the bucket or boom prior to raising the bucket. It cannot be attached to an adjacent pole, structure or other equipment while working in the bucket. Employees must follow fall protection requirements when wearing fall protection and inspect their fall protection before each use.

Other Personal Protective Equipment

Other personal protective equipment should include hard hats while working where objects can fall and strike employees. This is especially true when an employee is on the ground under the bucket or if the worker in the bucket is working with overhead tasks. Employees should wear hard hats when there is an increased risk of falling materials.

Manufacturer’s Weight Rating

Employees should not exceed the manufacturer’s weight rating on the bucket, and employees should not place anything inside the bucket that would exceed the weight rating. The weight rating can be found on the decals near the bucket or in the owner’s manual.

Safety While Working in the Bucket

Workers should not use ladders, planks or step stools while in the bucket. Employees are required to stand firmly on the floor of the basket. They must not climb or sit on the edge of the basket.

Additionally, workers must be aware of the area in which they are working. Cone off or guard the area under the bucket while it is in use to prevent individuals from walking underneath the bucket. This prevents bystanders from being struck by materials.

Training

All employees that are working with a bucket truck must be trained in the following prior to the start of work:

  • Use of fall protection
  • Manufacturer’s operating instructions for the bucket truck
  • Emergency response
  • Routine maintenance requirements
  • Potential hazards

It is important and required that employees receive training before using a bucket truck to prevent hazards from occurring.

Regardless of your job title, working safely is everyone’s responsibility!